MATERIALS WE SUPPLY

ACRYLIC / LUCITE / PLEXIGLAS

    Key Properties:
  • outstanding transparency
  • excellent weatherability
  • superior light transmission
  • good mechanical properties
    Stock Shapes Available:
  • Sheet
  • Round Rods, Tube
  • Square Rods, Tube
    Profiles:
  • J-Bar
  • Step Strip
  • Z Bar

LEXAN / POLYCARBONATE

    Key Properties:
  • superior impact and toughness
  • clarity
  • high mechanical strength and rigidity
  • good thermal properties
    Stock Shapes Available:
  • Sheet
  • Rod
  • Tube

POLYOLEFINS

    Chemical Names:
  • Low Density Polyethylene (LDPE)
  • High Density Polyethylene (HDPE)
  • Polypropylene (PP)
  • Ultra High Molecular Weight Polyethylene (UHMW)
    Stock Shapes Available:
  • LDPE Sheet
  • HDPE Sheet, Rod
  • PP Sheet
  • UHMW Sheet, Rod

ACETAL / DELRIN

    Key Properties:
  • high mechanical strength and rigidity
  • excellent wear
  • low moisture absorption
  • excellent dimensional stability
  • low coefficients of friction
    Stock Shapes Available:
  • Sheet
  • Rod

NYLON

    Key Properties:
  • outstanding wear and abrasion resistance
  • high service temperature
  • excellent impact resistance
  • excellent chemical resistance
    Stock Shapes Available:
  • Sheet
  • Rod
  • Tube

ABS

    Key Properties:
  • toughness
  • stiffness
  • good machinability
    Stock Shapes Available:
  • Sheet
ACRYLIC / LUCITE / PLEXIGLAS
STANDARD ROD SIZES
ACRYLIC / LUCITE / PLEXIGLAS
ROUND TUBE STANDARD SIZES

   Imperial Sizes     Metric Sizes
Diameter Lengths
(Ft)
Wt.
(Lbs./Ft)
Diameter
Tolerance
OD
(in)
ID
(in)
OD
(mm)
ID
(mm)
Wall
(mm)
.250 8 .026 ±.005 1/4 1/8 6.4 3.2 3.2
.312 8 .039 ±.005 5/16 3/16 7.9 4.8 3.2
.375 8 .056 ±.005 3/8 1/8 9.5 3.2 6.4
.500 8 .100 ±.005 3/8 1/4 9.5 6.4 3.2
.625 8 .158 ±.010 1/2 3/16 12.7 4.8 7.9
.750 8 .227 ±.010 1/2 1/4 12.7 6.4 6.4
.875 8 .309 ±.010 1/2 3/8 12.7 9.5 3.2
1.000 8 .403 ±.010 5/8 3/8 15.9 9.5 6.4
1.125 8 .511 ±.015 5/8 1/2 15.9 12.7 3.2
1.250 8 .630 ±.015 3/4 1/2 19.1 12.7 6.4
1.375 8 .630 ±.015 3/4 5/8 19.1 15.9 3.2
1.500 8 .762 ±.015 7/8 5/8 22.2 15.9 6.4
1.625 8 .907 ±.015 7/8 3/4 22.2 19.1 3.2
1.750 8 1.070 ±.015 1 3/4 25.4 19.1 6.4
1.875 8 1.240 ±.015 1 7/8 25.4 22.2 3.2
2.000 8 1.610 ±.015 1 1/4 1 31.8 6.4
2.125 6 1.820 ±.030 1 1/4 1 1/8 31.8 28.6 3.2
2.250 6 2.040 ±.030 1 1/2 1 1/4 38.1 31.8 6.3
2.500 6 2.520 ±.030 1 5/8 1 3/8 41.3 34.9 6.4
2.750 6 3.050 ±.030 1 3/4 1 1/2 44.5 38.1 6.4
3.000 6 3.630 ±.030 2 1 3/4 50.8 44.5 6.4
3.250 4 4.260 ±.045 2 1 7/8 50.8 47.6 3.2
3.500 4 4.940 ±.045 2 1/4 2 57.2 50.8 6.4
3.750 4 5.670 ±.045 2 1/2 2 1/4 63.5 57.2 6.4
4.000 4 6.450 ±.045 2 3/4 2 1/2 69.9 63.5 6.3
4.250 4 7.280 ±.045 3 2 3/4 76.2 69.9 6.3
4.500 4 8.200 ±.045 3 1/4 3 82.6 76.2 6.4
4.750 4 9.100 ±.045 3 1/2 3 1/4 88.9 82.6 6.3
5.000 4 10.100 ±.045 3 3/4 3 1/2 95.3 88.9 6.4
5.250 4 11.100 ±.045 4 3 3/4 101.6 95.3 6.3
5.500 4 12.200 ±.045 4 1/4 4 108.0 101.6 6.3
5.750 4 13.300 ±.045 4 1/2 4 1/4 114.3 108.0 6.4
6.000 4 14.600 ±.045 4 3/4 4 1/2 120.7 114.3 6.3
6.500 3 17.200 ±.050 5 4 3/4 127.0 120.7 6.4
7.000 3 20.000 ±.050 6 5 3/4 152.4 146.1 6.3
7.500 3 22.800 ±.050 7 6 3/4 177.8 171.5 6.3
8.000 3 26.000 ±.050 8 7 3/4 203.2 196.9 6.3
9.000 3 32.000 ±.050